It`s not practical to leave the stump there after all the effort to remove the tree. Here are a few of the best ways to remove the stump on your own.
The best method of removing stumps from trees is dependent on the length of time you`re willing to wait. A professional is the best choice when you`re trying to remove the stump as quickly as you can. If you don`t mind waiting for up to one year for the stump to fully decay, we suggest making use of Epsom salt to speed up the natural rotting process.
Tree stumps will naturally decay in three to seven years. However, the actual duration will vary based on the locationas well as the environment, climate and the type of tree. The stump will begin to decay faster in the event that it is not cut at an lower level.
Utilize a stump removal product from a commercial supplieror simply saltpeter (aka potassium Nitrate), to soften the wood so that it burns slowly and completely. Using a drill with an 8-inch bit that is that is between eight and twelve inches in lengthmake deep holes on the top of the stump. These holes should be spaced by three to four inches in all directions. Then, fill each hole with saltpeter or stump removaland top each hole off by boiling water, allowing it to dissolve it.
If the stump is dry completely, burning it could be a workable solution. This method may be more time-consuming than digging, and may not completely remove the roots below the soil`s level, however it can yield results , with a little less physical exertion. Before you decide to try this method, make sure to check with the local fire department for details on any warnings for burning within your region.
If removing a stump manually won`t work and you`d like to remove your stump (or stumps) quickly, you could always rent a grinder and grind away the stump yourself. Grinding takes less than 15 minutes, but it could take two hours or longer. Although you could hire someone to do the job, it is not difficult to tackle it yourself. When using a stump grinderensure you`ve got the right protective gear. Safety glasses and hearing protection are vital.
The process of grinding a stump is a risk to both the operator as well as others. The stump grinder crushes the material to about 8 inches deep , then throws it into a pile close by. A stump grinder may cause the destruction of utility lines and wood chips. It is suggested to call - before you plan to remove the stump from the tree usingthe stump grinder.